12v 250w dual output cable 12v led strip light driver , meet with ETL/cETL, CE Mark (EMC ,LVD) for North American, European markets, a perfect situation for Start Lighting outdoor constant voltage bar lghts.
Specification
| MODEL | SMT-012-250VW | SMT-024-250VW | |
| OUTPUT | DC VOLTAGE | DC12V | DC24V |
| RATED CURRENT | 20.83A | 10.42A | |
| CURRENT RANGE | 0-20.83A | 0-10.42A | |
| RATED POWER | 250 W | 250W | |
| RIPPLE&NOISE(max) | 150mV | 150mV | |
| CURRENT TOLERANCE | |||
| SETUP RISE TIME | 80ms/120VAC,220VAC | ||
| HOLD UP TIME(Typ.) | 60ms/120VAC,220VAC | ||
| INPUT | VOLTAGE RANGE | 100~265VAC | |
| FREQUENCY RANGE | 50~60Hz | ||
| POWER FACTOR(Typ.) | >PF0.97@120VAC & 220VAC | ||
| EFFICIENCY(Typ.) | ﹥89% | ||
| AC CURRENT(Typ.) | 1.85A/120VAC,220VAC | ||
| INRUSH CURRENT (Typ.) | COLD START 50A/120VAC,220VAC | ||
| PROTECTION | Short circuit | Protection type:recovers automatically after condition is removed | |
| Overload | overload protected@145-160% above peak rating | ||
| Over temperature | Protection type:Shut down o/p voltage,re-power on to removed | ||
| ENVIRONMENT | WORKING TEMP. | -40~+50℃ (Refer to output load derating curve) | |
| WORKING HUMIDITY | 20~99% RH non-condensing(Waterproof) | ||
| STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH | ||
| SAFETY&EMC | SAFETY STANDARDS | ETL/cETL,CE Mark(EMC ,LVD),IP67 | |
| WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC IP-GND:1.5KVAC | ||
| EMC Test Standards | EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006 | ||
| EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006 | |||
| NOTE | 1.All parameters NOT specially mentoned are measured at 120~220VAC input,rated load and 25℃ of ambient temperature. | ||
| 2.Ripple&noise are measured at 20MHz of bandwidth by using a 12 | |||
[1m12v250wデュアル出力ケーブル
12vledストリップライトドライバー、 と会います.
北米、ヨーロッパ市場向けのETL / cETL、CEマーク（EMC、LVD）。屋外の定電圧バーライトの照明を開始するのに最適な状況です。
仕様モデルSMT-012-250VW SMT-024-250VW 出力 DC電圧 DC12V DC24V
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
Gold Supplier
