Sales

HT19V 2は、30-54Vの出力電圧検出範囲と6m（H）x 14m（D）の高さ、シーリングライトに適した12-19Wの出力電力を備えた調光機能マイクロ波モーション検出器を備えたLEDドライバーおよびマイクロ波センサー2-in-1製品です。

認証 : CE、ROHS、TUV、レッド

製品の詳細

19W LED Driver & Microwave Sensor Constant Current 0.3A/0.35A Ceiling Light 14M(D)x6M(H)

HT19V 2 is a LED Driver&Microwave Sensor 2-in-1 Products with 30-54V Output Voltage Detection Range & Height of 6m(H) x 14m(D), Dimming Function Microwave Motion Detector with 12-19W Output Power Suitable for Ceiling Light

Features:

1. 3 years warranty, IP20

2. Abnormal protection SCP: Auto recovery, OVP, OCP, OTP

3. Tri-level control by 1-10V output

4. Dusk & Dawn Microwave Motion Sensor

5. Dimming Function with 10%/20%/30%/50% Stand-by Brightness

6. Constant Current with options of 0.3A/0.35A

7. Detection Range x Height of 14M x 6M

8. Output Power 19W max. with Voltage of 30 -54V

9. Efficiency of 87%

10. Empty Load voltage of 63V max.

11. EMC standardEN55015

Product Description

Input voltage	220~240VAC 50/60Hz
Input current	0.1 Max
Input power	22W Max
Detection area	50%/100%
Hold time	5s/60s/ 5min/10min
Daylight threshold	2Lux /10Lux /50Lux/Disable
Stand-by period	0s/10s/10min /+∞
Stand-by dimming level	10%/30%
Microwave frequency	5.8GHz±75MHz
Microwave power	<0.3mW
Detection angle	30°-150°
Mounting height	Max.6m
Detection range	Max.ø14m
Output LED current	0.3A/0.35A±5%
Output LED voltage	30-54V
Output LED power	12-19W Max.
Empty load voltage	≤63V
Power factor	＞0.9
Efficiency	87% (Max.)
Operating temperature	Ta: -20°C+50°C Tc: 80°C
Abnormal protection	SCP:Auto recovery,OVP,OCP,OTP
EMC standard	EN55015
Safety standard	EN61347-1 EN61347-2-13 EN60598-1
IP rating	IP20
Life time	30,000 hours
Warranty	3 years

Detection Range

This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.

Typical installation height 2.5-6m.

Mechanical structure

With eight DIP switch poles to set all parameters

With two DIP switch poles to choose different output current

With two installation hole, easily fixed to the lighting fixture for end user.

Wiring diagram

Two poles to connect with power supply (220-240VAC)

Two poles to connect with LED Light

Dimensions (mm)

DIP Switch Setting

Detection area Hold-time Daylight threshold Stand-by period Stand-by dimming level

In this area, The period of Definition of the The period of light The definition of movement will light keeping ambient brightness; keeping low output low output in the be detected 100% brightness only when the before it's standby period.
and able to after moving ambient brightness completely trigger the objects leave the is lower than the switched off. When sensor. 100% detection area. preset specific lux it's preset as∞“,detection

[1m19WLEDドライバーおよびマイクロ波センサー定電流0.3A/0.35Aシーリングライト14M（D）x6M（H）

特徴：