Waterproof 100 watt led power supply non dimmable led driver
96W waterpoof non dimmable led driver in 12vdc, ETL ,CE, ROHS approval, aluminum case design, universal 100-265vac input, work with STEP 1 DEZIGNS LED 3mm wide Mini High Output Tape Lights 100w.
Specification
MODEL | SMT-012-096VW | SMT-024-096VW | |
OUTPUT | DC VOLTAGE | 12V | 24V |
RATED CURRENT | 8.33A | 4A | |
CURRENT RANGE | 0~8A | 0~4A | |
RATED POWER | 96W | 96W | |
RIPPLE&NOISE(max) | 150mV | 150mV | |
VOLTAGE TOLERANCE | ±0.5V | ±0.5V | |
SETUP RISE TIME | 80ms/110V,220VAC | ||
HOLD UP TIME(Typ.) | 60ms/110V,220VAC | ||
INPUT | VOLTAGE RANGE | 100~265VAC | |
FREQUENCY RANGE | 50~60Hz | ||
POWER FACTOR(Typ.) | 0.95 | ||
EFFICIENCY(Typ.) | ﹥87% | ||
AC CURRENT(Typ.) | 0.92A/110VAC, 0.86A/220VAC | ||
INRUSH CURRENT (Typ.) | COLD START 50A/110VAC, 220VAC | ||
PROTECTION | Short circuit | Protection type:recovers automatically after condition is removed | |
Overload | overload protected@145-160% above peak rating | ||
Over temperature | Protection type:Shut down o/p voltage,re-power on to removed | ||
ENVIRONMENT | WORKING TEMP. | -30~+50℃ (Refer to output load derating curve) | |
WORKING HUMIDITY | 20~99% RH non-condensing(Waterproof IP67) | ||
STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH | ||
SAFETY&EMC | SAFETY STANDARDS | CE ETL Mark(LVD) | |
WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC IP-GND:1.5KVAC | ||
EMC Test Standards | EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006 | ||
EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006 | |||
NOTE | 1.All parameters NOT specially mentoned are measured at 110VAC,220VAC input,rated load and 25℃ of ambient temperature. | ||
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12 | |||
[1m防水100ワットLED電源非調光LEDドライバー
96Wウォータープーフ調光不可能なLEDドライバー
12vdc、ETL、CE、ROHS承認、アルミニウムケース設計、ユニバーサル100-265vac入力、STEP1DEZIGNSで動作
LED3mm幅ミニ高出力テープライト100ワット。仕様 モデル SMT-012-096VW SMT-024-096VW 出力 DC電圧